Sound Devices 833

The 833 is the professional's tool for mobile and small productions. Like the popular Sound Devices 633, the 833 is small, lightweight, and compact. A tactile interface with dedicated faders, trim knobs and PFL switches makes this mixer-recorder ideal for run-and-gun bag use.

The 833 has 6 mic/line preamplifiers, 8 channels, 12 tracks, 6 analog outputs, and ultra-accurate timecode. Many features have carried over from the premium Sound Devices' Scorpio, such as Sound Devices' new preamplifier design, 2 SD card slots, dual L-Mount battery charging and powering and an internal 256 GB SSD.

Additionally, the 833 shares the same processing architecture and multiple FPGAs as the Scorpio. This enables the 833 to be fully routable, and any physical input can be routed to any track. The 833 features both digital and analog inputs and outputs and has multiple powering options, so it will fit effortlessly into your existing kit.

A built-in three band EQ may be set to either pre- or post-fade for each channel to tackle any problems directly on-set. Enable Dugan Automixing to automatically attenuate unused microphones in multi-microphone applications. Up to 8 channels can be automixed at a time, and two separate groups can be mixed simultaneously.

Dedicated coms and slate allows for professional bi-directional communication with other crew members. Send customized mixes to the camera or crew with multiple mix buses. With the ability to record to three media simultaneously, you can turn over SD cards to production at the end of the day while keeping a backup on the internal 256 GB SSD.

The 833 may be controlled via the companion Android app, SD-Remote, which features transport controls, metering, and sound reports. For an instant mobile workstation, choose from one of several supported USB control surfaces for remote fader and transport control.

FEATURES:

• 6 ultra low-noise, all-new microphone preamplifiers
• 8 channels, 6 buses, 12 tracks
• 6 analog outputs
• ultra-accurate timecode
• 256 GB internal SSD, 2 SD card slots
• Dugan Automixing for up to 8 channels
• USB-A and C ports for SD-Remote app, linear fader control via MCU, keyboard, and file transfer

Seven high quality, non detent (smooth) endless encoders with selectable trim (gain) or volume fader functionality. Tailor made for 8-series recorders, designed and assembled by hand in Denmark. Please read the full description and FAQ below before you purchase. 

User manual:

• Plug and power via 8-series USB A. No setup required.
• Turn encoders to adjust channel volumes
• Press an encoder to show channel page, trim is now available to adjust
• Press, hold and turn to trim, super fast workflow.
• Extensive customization of LED colors and behaviour
• 4 customizable fader modes
• Comes with a mounting solution to fit the 833 perfectly
• On screen PONG game

FAQ:

Can I change the channel configuration?
Yes! Version 3 has extensive customization options in the menu. Control any channel on any mixer you like. 

What’s the build quality like?
The electronics inside is a factory made custom embedded PCB design. Low EMI and power efficient, very proud of this one. The enclosure is manufactured by me with expertly fine tuned 3D printers using PETG material – durable, UV/heat resistant. I am pushing the technology to provide the best looking surface finish possible. This is not your regular 3D printed object. 

Will this work on my 6-series, 7-series, MixPre, Zoom recorder, etc ?
These units are only compatible and specifically made for Sound Devices 8 series. You might be able to use it in your DAW though

What happens if I plug this into a 888 or Scorpio?
The controller is ready to control 888 or Scorpio, just go to the menu and select your mixer model.

What about an 8 ch version?
There’s an 8 channel version available, but it’s wider than an 833 and fits an 888. TF8+ is made to fit an 888 physically but works for 833 or Scorpio if you want. There’s also a very compact 2 knob controller available for both 833, 888 and Scorpio: TFX.

Can I use multiple USB controllers at a time?
Yes with a hub. Please consult the 8 series manual regarding third party controller spill / individual mode to determine if this will work with your use case.

How do I mount this thing?
It comes with a pair of mounting brackets so you can attach the controller firmly directly to the 833.

=>> Watch this VIDEO