Bundle including:

• Sound Devices SL-2  -  Wireless Module
  
• Sound Devices 833  - Mixer/recorder
  
• Sound Devices +4 - Plugin for 4 additional recording tracks
• Sound Devices XL-MCX to SMA - Cables for connecting third receiver

833

The Sound Devices 833 is the professional’s tool for mobile and small productions. Like the popular Sound Devices 633, the 833 is small, lightweight, and compact. A tactile interface with dedicated faders, trim knobs, and PFL switches makes this mixer-recorder ideal for run-and-gun bag use.
The 833 has 6 mic/line preamplifiers, 8 channels, 12 tracks, 6 analog outputs, and ultra-accurate timecode. Many features have carried over from the premium Sound Devices’ Scorpio, such as Sound Devices’ new preamplifier design, 2 SD card slots, dual L-Mount battery charging and powering, and an internal 256 GB SSD.

Overview

• Dimensions : 5.1 cm x 22 cm x 17 cm
• 6 ultra low-noise, all-new microphone preamplifiers
• 8 channels, 6 buses, 16 tracks
• 6 analog outputs
• Ultra-accurate timecode
• 256 GB internal SSD, 2 SD card slots
• USB-A and C ports for SD-Remote app, linear fader control via MCU, keyboard, and file transfer
• Dugan Automixing for up to 8 channels
• Optional  NoiseAssist  and  CEDAR sdnx  noise suppression plugins

SL-2

The SL-2 Dual SuperSlot Wireless Module is the first model of a new range of SuperSlot™-based accessories which bring integrated multichannel wireless to the 8-Series mixer-recorders. The SL-2 is a two slot-in wireless receiver integration system that easily mounts to the top panel of any 8-Series mixer-recorder. It accepts UniSlot and SuperSlot™ wireless receivers from a variety of manufacturers. 

Power to the SL-2 and receivers is supplied by the 8-Series mixer-recorder – no external DC connector is needed on the SL-2. Analog or digital audio is sent from the receivers into the mixer-recorder via the expansion port, reducing messy cabling for power and audio connectivity. 

The SL-2 offers antenna distribution to slot-in receivers, spreading out the placement of antennas for better RF performance. The rear panel of the SL-2 is equipped with two TA3 connectors for an additional four inputs of AES3 audio.

• Compatible with the 833, 888, and the Scorpio.
• Accepts two UniSlot or SuperSlot wireless receivers from Audio Ltd, Lectrosonics, Sennheiser, Sony, Shure and Wisycom.  
• Built-in antenna distribution with antenna powering for active antennas or boosters.
• Supports remote control of third party smart antennas.
• Two auxiliary MCX antenna ports for connecting other receivers or RF distribution.
• Two TA3 AES3 inputs for an additional 4 channels of digital audio.
• Two DC Outputs via Hirose 4-pin connectors, each supplying up to 500 mA.
• Powers via an 8-Series mixer-recorder.
• Accepts either analog or digital audio from slot-in receivers.
• Ability to set and monitor multiple functions of a SuperSlot-compatible receiver from the 8-Series mixer-recorder. Power on/off
• RF Scan with visual representation of the RF spectrum
• Monitor transmitter battery, receiver audio, and RF levels
• Rugged, lightweight, and compact design.
• Mounts to the top of any 8-Series mixer-recorder. 
• Same width as the 833  dim.  4.5 cm x 21.3 cm x 13.1 cm

+4 Plugin

The +4 Plugin adds four fully-featured ISO channels/record tracks, turning your 833 into a 12 channel, 16 track mixer-recorder.

These additional channels can be sourced from any input and routed to the main mix bus, additional buses, and any output. Now you can pack in the tracks with wireless channels from your SL-2 and via the analog, AES, or USB inputs.

You can also use the extra channels for redundancy: record up to 6 unprocessed and 6 processed tracks with any effect. Apply low-cut, EQ, delay, limiters, compression, Automix, NoiseAssist or CEDAR sdnx – just like the original eight channels.

The +4 Plugin requires 8-Series and SD-Remote v8.80 or higher to run.