WindKiller Large Fur Windscreen. The Windkiller SE (Special Edition) combines the finest quality fur, design and manufacturing standards to effectively protect your portable recorder mic(s) against wind noise. On the outside, The Windkiller SE features the high-density, soft, multi-pile fur.

The Windbubble Pro (Twin Pack) - Xs, Black

The Windbubble Pro (Twin Pack) - Xs Extreme, Black

The Windbubble Pro (Twin Pack) - Small, Black

The Windbubble Pro (Twin Pack) - Small Extreme, Black

The SideKick Broadcast Spares Kit. A full collection of accessories for your Sidekick Broadcast IFB Monitor.

Highly flexible UHD HD-SDI cable 5,0m

RAD Low Profile 3-Pin XLR Cable (Length: 275mm)

Locking 3.5mm to 9-Pin Timecode Cable for RED Komodo

Neutrik XLRf - Neutrik XLRm, "Reference" cable, length 30m

Neutrik PowerCon-in - Neutrik PowerCon-out, "Professional" cable, length 5m

Power adapter for NP1 batteries. Strong retention and available with Hirose 4p (straight). Cable length 45 cm. [NP1PC]

Spring-clip holder for Zaxcom VRX receivers; secure mounting, rear battery access and durable thermoplastic design that prevents housing damage. [VRX-BC]

1/4" thread mount holder for Zaxcom VRX receivers; vertical or horizontal positioning, 3 mounting points and rear access to the battery compartment.

Belt clip for Zaxcom ZMT-X transmitters. Compact and practical design, easy to use and made of durable thermoplastic material. [ZXBCH]

Belt clip for Zaxcom ZMT transmitters. Spring-clip mechanism, compact, lightweight (25 g) and made of weather-resistant thermoplastic material. [ZMTBCH]

Belt clip bracket for Zaxcom URX 50/100 receivers. Rear battery compartment access, thermoplastic, easy to use. [URX50BCH]

Dummy NP1 battery met integraal XLR4p

Lucky MIC Blank, threaded, no adapter included.

Smart Battery Cup to TA4F connector

Replacement Windcover for Rycote BBG, Single

4-Pin Hirose to HiQ Battery Cup

MD-6 HRS output cable with right angle plug. For use with Zaxcom Stereoline, RX900, QRX, Mic Plexer, Sound Devices MixPre (v1), and 442(v1). (761K)

Controller Cover for CL-12 ALAIA, Black.

Professional XLR-XLR cable with heat shrink for your own name or logo, 20 m

Stereo condenser Video/Recording microphone

GEL- filled ear pads for Remote Audio High Noise headset. 1 pair.

Power-Con 2-pin (M) - Dual Hirose 4-pin Female Socket

Deluxe Windshield for NTG-1 en NTG-2

Deluxe Windshield for NTG-3

Antenna with elbow. Cut to length by user.

Charger for 2x NP-50 battery.

Hollow foam windscreen, 90mm diameter

In Line Cable mounted Pre-amp

Pouch for Log Periodic Dipole Array antenna for Diversity reception.

6060, Subminiature Grid, Metal, Black, 3 pcs.

Miniature Grids, 5pcs, High Boost, White

Miniature Grids, 5pcs, High Boost, Black

Np-Sqn Adapter

Miniature Grids, 5pcs, Soft Boost, White

6060, Subminiature Grid, Metal, Beige, 3 pcs.

Soft Circleswhite (Pack of 5

Soft Circles - 100 Beige Soft Circles

Hirose Male to Hirose Male Powering Cable (30cm)

Miniature Grids, 5pcs, Soft Boost, Black

Soft Circles - 100 Black Soft Circles

Miniature Grids, 5pcs, Soft Boost, Beige

Boom pole support, takes the weight off the mic boom

Battery output cable, Hirose 4pin, 4 wires

Battery output cable, XLR 4pin

Battery output cable, TA4F connector, 4 wires with telemetry, for SD 8-series

Neutrik SP4 - Neutrik SP4, 4x2.5mm² cable, length 5m

Transmitter whip antenna for Wisycom transmitters (also compatible with other brands).

Shockmount voor NT2-a NT1000, NT2000, NTK, K2, Classic ||. (black)

Updated Camera shoe mount with Rycote Lyre Suspension Mount

Updated 3/8" or 5/8" Thread mount with Rycote Lyre Suspension Mount

Waterproof Radio Microphone Case - Small

Mounting Bracket Upgrade Kit for Reflexion Filter Pro

Caddy for 8 BT100 batteries. Compatible with Zaxcom ZMT-X and Motorola radios. Biocompostable material, 55 g, available in 2 colors. [BT100BH-X8]

31Wh/4.4Ah NP-F-type (Sony L-series) DV battery

Dynamic, cardioid vocal microphone

Hawk-Woods power adapter HRS to 2x switched HRS

Closed-back Monitoring Headphones

The Windbubble Pro (Twin Pack), Large, Black

Cardioid Dynamic Vocal Microphone

Cup Holder Rig with 3/8 inch thread on a 5 inch gooseneck

Kit Pouch wearable accessory pouch for K-Tek sound bag attachments and technical backpacks; clip-on mounting, detachable strap and added storage. [KIT-PH]

Retention system for boom poles. Semi-automatic, secure lock with thermoplastic coating. Horizontal version. [KRBH-V/H]

Caddy for 12 LBP61 batteries. Compatible with Wisycom MTP61 and cameras. Biocompostable material, 46 g, available in 2 colors. [LBP61BH-X12]

Caddy for 12 NP-BX1 batteries. Compatible with A20 Mini and cameras. Biocompostable material, 45 g, available in 2 colors. Made in the EU. [BX1BH-X12]

Caddy for 12 NP-50 batteries. Compatible with Zaxcom ZMT, Lectrosonics SSM and cameras. Biocompostable material, 45 g, available in 4 colors. [NP50BH-X12]

Flip mount for small tablet to work in an ENG audio bag. Designed to fit into the elastic receiver straps provided in most ENG bags and thin enough to still allow a receiver to share the same strap. Magnetic platform is hinged to flip tablet over for camera to shoot visible displayed timecode. Great companion for the Nomad Touch or Movie Slate.

Paintable Subminiature Cap, 3 pcs.

Gooseneck Electret Mic

AC wall mount power supply with USB-C connector and adapter plugs. Does not recharge batteries.

Orca Boom Pole Holder, for Medium Sized Boom Poles.